+Max Power 36watt
+365nm, 405nm valon taajuudet suunniteltu erityisesti kuivattamaan INKin UV/LED-tuotteet
+Suunniteltu kuivattamaan kaikki 5 kynttä kerralla
+Ajastimet 30sec, 60secs & 120sec
+Kaksisuuntainen sensori (näkyy tekijälle ja asiakkaalle)
+18 strategisesti aseteltua Multi LED valoa
+Magneettinen irrotettava pohja
+KOOL Mode vaihtoehto, joka auttaa vähentämään polttelua.
+CE Certified

Lampun mitat:
Korkeus: 8,4cm (5,4cm)
Leveys: 20,5cm (15cm)
Syvyys: 17,6cm (14cm)
Sisäosan/ käden mentävän aukon mitat suluissa.

+12 kuukauden takuu. Lamppu pitää palauttaa alkuperäisessä pakkauksessaan, joten älä hävitä pakkausta. Johtojen takuu on 3 kuukautta. Meiltä voit myös ostaa uuden johdon. Jos sinulla on ongelmia tai kysyttävää lampusta, ota meihin yhteys sähköpostilla info(a)inknailsfinland.fi

+Käytä ainoastaan mukana tullutta johtoa. Takuu raukeaa, jos käytät muita johtoja. Lue lampun mukana tulleet ohjeet huolella. Älä puhdista lamppua asetoonilla, koska muoviosat sulavat asetooniin.

Platinum X has been specifically designed to cure the INK London range so rest assured that in purchasing the lamp and provided you follow our cure times laid out for each product you have eradicated the risks of under curing and service breakdown. Platinum X has been specifically targeted to activate the photo-initiators used in the production of our UV/LED curable products.

+2-way digital sensor (visible to both the tech and client)
+Max Power 36watt
+18 MULTI LEDs specifically targeted to INK’s UV/LED Curable Products
+White pearlized housing
+Designed to cure all 5 fingers at once
+Magnetic, removable base plate
+Time setting options 30sec, 60secs & 120secs
+Auto Sensor with memory function

+Soft Mode option available for all time settings – Perfect to reduce the initial heat felt when polymerising products such as iJel and JELLY PRO. Please note that soft mode is a low power setting designed to help clients that suffer from varying degrees of sensitivity during the early stages of polymerisation. If using soft mode for full curing then you must double the time you normally cure that specific product for.

+12 month warranty: If a fault develops with the lamp please contact us for a return authorisation code and return address details. The lamp must be returned to us in its original packaging (box…so please do not discard it) together with the original adaptor cable. Lead adaptors are guaranteed for 3 months. These are the terms under which we (INK) sell and you (the client) purchase the Platinum X lamp. Please take extra care when transporting the lamp, especially the lead/adaptor, lead/adaptors that have been damaged cannot be replaced although we have made them available at cost for purchase. For the full terms of sale and service please see the Terms & Conditions section of the website. Be sure to read thoroughly before purchasing!

+12 month warranty: For the full terms of sale and service please see the Terms & Conditions section of the website.

+Free UK Delivery

+CE Certified

+Curing times vary depending upon the product used and the thickness of the layers. As a guide we advise that iLac/xLac be cured for 60 seconds (full power), iJel/JELLY PRO/Gel Paint/3D Gel for 60 seconds (full power) and Acrygel SYNC 120seconds (full power).

Please only use the lead adaptor provided with the lamp, failure to do so will result in the invalidation of your warranty. Read the instructions provided with the lamp prior to use.

READ INSTRUCTIONS CAREFULLY FOR ADVICE REGARDING CLEANING. USE OF SOLVENTS eg ACETONE WILL PERMANENTLY DAMAGE THE AESPHETICS OFF THE LAMP

Artikkeli Platinum X LED Curing Lamp julkaistiin ensimmäisen kerran Ink Nails Finland.

Lampun mitat:
Korkeus: 9cm (6,5cm)
Leveys: 20cm (17cm)
Syvyys: 22cm (16,5cm)
Sisäosan/ käden mentävän aukon mitat suluissa.

+12 kuukauden takuu. Lamppu pitää palauttaa alkuperäisessä pakkauksessaan, joten älä hävitä pakkausta. Johtojen takuu on 3 kuukautta. Meiltä voit myös ostaa uuden johdon. Jos sinulla on ongelmia tai kysyttävää lampusta, ota meihin yhteys sähköpostilla info(a)inknailsfinland.fi

+Käytä ainoastaan mukana tullutta johtoa. Takuu raukeaa, jos käytät muita johtoja. Lue lampun mukana tulleet ohjeet huolella. Älä puhdista lamppua asetoonilla, koska muoviosat sulavat asetooniin.

KOOL48 was specifically designed to cure the INK London range so rest assured that in purchasing the lamp and provided you follow our cure times laid out for each product you have eradicated the risks of under curing and service breakdown. KOOL48 has been specifically targeted to activate the photo-initiators used in the production of our UV/LED curable products.

+Max Power 48watt
+365nm, 405nm Wave lengths specifically targeted to INK´s UV/LED Curable Products
+Designed to cure all 5 fingers at once
+Time setting options 30sec, 60secs & 120secs
+30 Strategically placed LEDs
+Auto Sensor

+KOOL Mode option set to 120seconds – Perfect to reduce the initial heat felt when polymerising products such as iJel and JELLY PRO. Please note that cool mode is a low power setting designed to help clients that suffer from varying degrees of sensitivity during the early stages of polymerisation. If using KOOL mode for full curing then you must double the time you normally cure that specific product for.

+12 month warranty: If a fault develops with the lamp please contact us for a return authorisation code and return address details. The lamp must be returned to us in its original packaging (box…so please do not disgard it) together with the original adaptor cable. Upon receipt of the lamp we will test the lamp and if we find it to be faulty and free from signs of misuse/damage we will despatch a replacement lamp. Lead adaptors are guaranteed for 3 months. These are the terms under which we (INK) sell and you (the client) purchase the KOOL48 lamp. Please take extra care when transporting the lamp, especially the lead/adaptor, lead/adaptors that have been damaged cannot be replaced although we have made them available at cost for purchase.

+Curing times vary depending upon the product used and the thickness of the layers. As a guide we advise that iLac/xLac be cured for 60 seconds (full power), iJel/JELLY PRO/Gel Paint/3D Gel for 60 seconds (full power) and Acrygel SYNC 120seconds (full power).

+CE Certified

Please only use the lead adaptor provided with the lamp, failure to do so will result in the invalidation of your warranty. Read the instructions provided with the lamp prior to use

READ KOOL48 INSTRUCTIONS CAREFULLY FOR ADVICE REGARDING CLEANING. USE OF SOLVENTS eg ACETONE WILL PERMANENTLY DAMAGE THE AESPHETICS OFF THE LAMP

Artikkeli INK KOOL48 LED Curing Lamp julkaistiin ensimmäisen kerran Ink Nails Finland.